Skip to content
AnglerTechCalc
Menu

Calculators

Quick answer

16 calculators for fishing electronics and boat rigging. Every one shows its formula on the page, labels each figure as a published engineering figure, a rule of thumb or something that only exists on your own boat, and returns "not published" rather than an estimate where no published figure exists.

Three rules apply to all of them, and they are the reason this site exists. The working is visible, so you can check it against your own manual rather than trusting a black box. Every number declares its basis, because an ABYC drop limit and the two pounds of thrust per hundred pounds convention look identical in a results table and are not remotely equivalent. And where nobody publishes a figure, the answer says so: we do not print an ampacity by wire gauge, and we do not print a knot strength percentage, because in both cases a single number would be wrong in a direction that matters.

Trolling motor sizing

Batteries and charging

Wiring and protection

Sonar and displays

On the water

Boat systems

Researched, not professional advice. These calculators work arithmetic on the numbers you give them. The capacity plate on your boat, the manual for your own motor, battery and charger, and ABYC E-11 for anything electrical are what actually govern. Marine electrical work is not house wiring, a lithium battery needs a charger with a lithium profile, and in early season the hazard is cold water immersion rather than depth.